Fact Sheet
Product Specifications for application in Construction
1) Sizing Parameters
The film is composed of two outer layers of polyester with coating of a transparent conductive layer on the inner surface.Between the two layers of polyester there is a layer of liquid crystals dispersed in a solid matrix polymer (PDLC).
Total Thickness: 385 (+/-10) µm
Dimensions:
- Maximum width of the active surface: 1800 mm - (Standard widths are: 1800 e 2900 mm)
- Length of the active surface: From 1000 up to 2900 mm
2) Electro-Optical Properties (20°C) - Average Values
Condition Off (Matt):- Total light transmitted: 55% (+/- 5%)
- Light transmitted direct (1° collecting angle): < 1%
Condition On (Transparent) - (60 VAC, 50 Hz, sinusoidal):
- Total Transmission: 75%
- Haze: 5%
- Haze angle (45°): 13%
- Power Requirement: 3-5 W/m2
Response Times: < 0,1 sec
3) Operating Ranges
- Operating Voltage: 60 VAC (50Hz, sinusoidal)
- Operating temperature range operation: da -20° a +60 °C
4) Available electrical contacts
Standard Conditions.The electrical contacts (copper tracks) are normally positioned along two opposite sides of the panels.
Are also possible alternative arrangements of electrical contacts that can lead to an even higher voltage, but within 80 Vac.
Aglatec remains available to propose the most appropriate solutions to customer needs and taking into account the efficacy and safety of the installation.